Setting DLST - C400KF

The next two DLST changes should already be programmed into your clocking terminal.

If you need to change these settings you will need to be at the clocking terminal and have the Admin Card with you.

Press the Menu button, then swipe the Admin card when the padlock symbol displays.

Select the SYSTEM option

Ensure that the Daylight Saving Time is set to ON

Once switched on your will see 2 additional menu items (you may need to scroll down)

Select the Daylight Saving Setup and press M/OK

In here you can set the Spring (Start) and Autumn (End) changes.  This Google search will show the next 2 changes.

Below is a typical setup. (for 2017 only)

When complete use the ESC key to exit the menus.

**IMPORTANT - These settings must be amended at least once every 12 months otherwise the date change will be incorrect**