How to Change Wifi Settings to use Lan settings

In some situations it makes more sense to utilise a a hard wired network connection rather than the Wifi.

These simple instructions explain how to change the settings.

Step 1,

Disable  wifi IP address.

Using the Admin card log into the clock menus

Select the COMM option

Navigate to the Wifi Setting and make a note of the IP Address in here (192.168.1.202)

Now change the first part of the IP address

(e.g 192.168.1.202 now becomes 10.168.1.202)

Escape out of this screen and save where prompted.

Step 2.

Change the Network IP to match the IP you made a not of before.

Using the Admin card log into the clock menus

Select the COMM option

Navigate to the NETWORK Setting 

Now change the IP address to the one you made a note of before.  

If you are unsure you can check the correct IP address to use in your Clockrite software.

Once changed, Escape out of the screens and save where prompted.