FINGERPRINT - Adjusting Clock Settings - Pre-ZMM

Adjusting the sensitivity of the fingerprint reader can help when staff have issues clocking in or out.  

To do this you will need the Admin card to access the menus. 

Press M/OK. Swipe the Admin Card in front of the reader.
Select “System” and press M/OK
Select “System” and press M/OK again. 
Navigate to “Sensitivity” and adjust setting from Mid to LOW
Press M/OK to save the change.
Press Esc key several time to exit out if the menus.

Once this has been done, it is best practice to delete the fingerprint of the affected user and re-register.

To do this you will need the Admin card to access the menus. 

Press M/OK. Swipe the Admin Card in front of the reader.
Select User Manage and press M/OK
Select “Manage” and press M/OK
Navigate to the user
and press M/OK
Press M/OK
Select Del User and press M/OK
Select Delete Fingerprint
Press Esc then follow the procedure for registering Fingerprints.