How to Send New Employee Data to a C200/C250 (Fingerprint) USB ONLY

Once you have created your new employee(s) in the Clockrite software you must now send the information to the clocking terminal.

You will need an Admin Card

and a USB memory stick

Plug the USB stick into your PC.

In the Clockrite software Click on the  CLOCK OPERATIONS icon (square clock top toolbar)

Then click on the  OPEN CLOCK DOWNLOAD UTILITY (round clock bottom toolbar)

In the new window select (  Send Employees) USB Stick Colour

Then click the SEND button and click Yes on the popup window, assuming you have set as  USB Stick Colour

Using the left side navigation panes, click on the USB Disk you inserted earlier, then click Save

***IMPORTANT - If see any files called "template.fp10" or "template.fp10.1" please STOP and call us on 01246 267715***

You will get a prompt confirming data has been sent.

You now need to unplug the USB disk and take it to the C200/C250 clocking terminal.

Plug the USB into the USB port in the left hand side of the clock

Press  M/OK or M on the clocking terminal

Swipe the ADMIN card