PSU Voltage Test

For this process you will require a Multimeter

Plug the ClockRite Power Supply into a socket that you know works correctly

Connect your Multimeter cables

Turn the setting to DCV 20 (as shown below)

Connect the RED testing end INSIDE the connector from the transformer

Touch the BLACK testing end to the OUTSIDE of the connector.

The multimeter will now show the voltage coming out.

If you see a ZERO reading this means that the transformer has FAILED and must be replaced.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Last updated on October 25, 2023