C-860 Monthly to Weekly Card Settings Change

Please see below for instructions on how to change the printing settings on your C860 clocking terminal from Monthly to Weekly cards:

1. Firstly remove the front panel at the top of the clocking terminal. You will need to undo the lock using the key 🔑 provided with the clocking terminal.
2. You will need to put the clocking terminal in to settings mode. This can be done by moving the Set -/0 program switch inside the terminal to the right 🠖 (see the below image) 
   
   The terminal should now go in to settings mode. You will know if it is in settings mode as there will be a '00' displaying in the bottom left of the device screen. '00' is the first settings option in the terminal.
   
   Pressing In/Enter will save the current setting and move to the next option. If you go too far press 'Back' to go back to the previous option.
   
   Using the In/+ and Out/- will increase or decrease the settings value
   
3. Keep pressing In/Enter to go through to option '33'.
4. Using the In/+ or Out/- change the value to '0100'.
5. Press In/Enter again to save the settings and keep doing so until you are on option '34'.
6. Finally move the Set -/0 switch back to the 🠔 Left position. The time/date will re-appear.