Changing the date or time (C100/C240/Proxy/B&W Display)

f you need to change the date or time in your Clockrite C100 or C240 terminal you will need the ADMIN card to log in.

At the clock, press the MENU button. (the screen will show Admin Affirm 1 at the top)

Swipe the Admin card to access the menus

Scroll down to OPTIONS and press F4/OK

Select SYSTEM OPT and press F4/OK

Select DATE TIME and press F4/OK

Once in here you can set the date and time. Just highlight the appropriate numbers using the up keys and then over type with the correct numbers.

When finished press F4/OK and save where prompted.

Press F1/ESC to exit out of the menus. If prompted to save again press F4/OK.