C210 - 1. Connecting the C210 to your Wifi

Press M/OK on the keypad     

Select System and press M/OK.

Select Ethernet and press M/OK.

Select WIFI Setting

Select your Wifi from the list

Enter your password in the box.

Numeric characters are enabled by default.  To enable ALPHA (letters) press the M/OK button.  Then press the relevant number on the keypad to bring up a letter.

To return to numerics, press the ESC once.

Once your password has been entered, select the M/OK icon.

The screen will now show Connecting, then Connected.  If this does not connect then check the UPPER and lower case characters in the password and try again.

Once connected make sure the Wifi is selected, then press M/OK.  

This will show you the IP address that the clock has connected to.  You will need to know this IP address to connect to your software.

.